2: PROGRAM
SELECT |
|
* | (“*” DISPLAY THE LETTER CHOSEN. DEFAULTS TO “A”) |
SELECT CYCLE TYPE |
|
* | (“*” DISPLAY THE CYCLE TYPE “AUTO” or “MANUAL”) |
AUTO
0:REVERSE MODE
ON OFF
1:ENTER DRY TEMP 160° F TO 200° F (71° C TO 93° C)
*** F | (“***” = THE DEFAULT DRY TEMP FOR THAT CYCLE) |
2: ENTER DRYNESS LEVEL FINISH, DRY, EXTRA DRY | |
*** % | (“***” = THE DEFAULT DRY LEVEL FOR THAT CYCLE) |
3:ENTER CYCLE ADJUSTMENT LEVEL 0 TO 99 (75 = DEFAULT)
4:ENTER CONTROLLED COOL DOWN
(OFF = DEFAULT VALUE)
5:ENTER COOL DOWN TIME 0 TO 90 MINUTES (4 = DEFAULT VALUE)
6:ENTER COOL DOWN TEMPERATURE 70° F TO 100° F (21° C TO 38° C) (80 = DEFAULT VALUE)
MANUAL
0:REVERSE MODE
ON OFF
1:ENTER SPIN TIME 30 TO
*** SEC | (60 = THE DEFAULT TIME FOR THAT CYCLE) |
ENTER STOP TIME 5 TO | |
*** SEC | (5 = THE DEFAULT TIME FOR THAT CYCLE) |
2: ENTER DRY TEMP 100° F TO 200° F (38° C TO 93° C) | |
*** F | (“***” = THE DEFAULT DRY TEMP FOR THAT CYCLE) |
ENTER CONTROLLED COOL DOWN ON OR OFF | |
(OFF = DEFAULT) | |
3: ENTER DRY TIME 0 TO 99 MINUTES | |
** MIN | (0 = THE DEFAULT MINUTES FOR THAT CYCLE) |
4: ENTER COOL DOWN TIME 0 TO 99 MINUTES | |
** MIN | (4 = THE DEFAULT TIME FOR THAT CYCLE) |
5: ENTER COOL DOWN TEMP 70° F TO 100° F (21° F TO 38° C) | |
*** F | (100 = THE DEFAULT TEMP FOR THAT CYCLE) |
6:ENTER STEAM INJECTION ON OR OFF (OFF = DEFAULT VALUE)
3:PROGRAM
1:SEE 2: PROGRAM
4:DEFAULT SETTINGS
ENTER PASSWORD (PRESS “1” “2” “3”)
CONFIRM DEFAULTS
NO | (DEFAULT VALUE) |
YES |
|
28
