C.INPUT/OUTPUT (I/O) BOARD L.E.D. INDICATORS
1.Inputs
1. ESTOP – (RED L.E.D.) This light emitting diode (L.E.D.) will indicate the status of the
STOP has been pressed, then the L.E.D. is ON.
2.GAS_V – (RED L.E.D.) This L.E.D. will indicate the status of the gas valve. If the gas valve is open (ON), then the L.E.D. is ON.
3. | BRHL – (RED L.E.D.) | This L.E.D. will indicate the status of the burner high limit disk. If the disk is |
|
| closed (temperature below 330° F [166° C]), then the L.E.D. is ON. |
4. | SAIL – (RED L.E.D.) | This L.E.D. will indicate the status of the sail switch. If the switch is closed, then |
|
| the L.E.D. is ON. |
5. | EXHL – (RED L.E.D.) | This L.E.D. will indicate the status of the exhaust high limit disk. If the disk is |
|
| closed (temperature below 225° F [107° C]), then the L.E.D. is ON. |
6. | MAIN – (RED L.E.D.) | This L.E.D. will indicate the status of the main door. If the door is closed, then |
|
| the L.E.D. is ON. |
7. | LINT – (RED L.E.D.) | This L.E.D. will indicate the status of the lint drawer. If the drawer is closed, |
|
| then the L.E.D. is ON. |
8. | FUSE – (RED L.E.D.) | This L.E.D. will indicate the status of the Phase 7 |
|
| controller (computer) voltage. If the POWER ON button is pressed (green button |
|
| light is on), then the L.E.D. is ON. |
9. | H2O – (RED L.E.D.) | This L.E.D. will indicate the status of the water pressure switch on the Fire |
|
| Suppression System (F.S.S.) water line. If water pressure is present, then the |
L.E.D. is ON.
2.Outputs
10. | F.S.S. – (GREEN L.E.D.) | This L.E.D. will indicate that the F.S.S. system output is activated. |
11. | STEAM – (GREEN L.E.D.) | This L.E.D. will indicate the status of the steam injection output. If the |
|
| request to turn on the steam injection is made, then the L.E.D. is ON. |
12. | _HEAT – (GREEN L.E.D.) | This L.E.D. will indicate the status of the heat output. If the request to turn |
|
| on the heater is made, then the L.E.D. is ON. |
13. | AIR – (GREEN L.E.D.) | This L.E.D. will indicate the status of the air jet output. If the request to |
|
| turn on the air jet is made, then the L.E.D. is ON. |
14. | REV – (GREEN L.E.D.) | This L.E.D. will indicate the status of the basket (tumbler) reverse direction |
|
| output. If the request to tumble the drum in the reverse direction is made, |
|
| then the L.E.D. is ON. |
15. | FWD – (GREEN L.E.D.) | This L.E.D. will indicate the status of the basket (tumbler) forward direction |
|
| output. If the request to tumble the drum in the forward direction is made, |
|
| then the L.E.D. is ON. |
16. | FAN – (GREEN L.E.D.) | This L.E.D. will indicate the status of the fan output. If the request to turn |
|
| on the fan (blower) is made, then the L.E.D. is ON. |
84
