Mechanical assembly – Floor Anchoring
Recommended minimum number of floor bolts per Enclosure: 4 (1 in each corner).
Recommended floor bolt size: 5/16(3/8) in/8 mm.
Note
Floor anchoring of stand-alone systems
In seismic areas, it is recommended that the installation be bolted to the floor, and that the batteries be secured in the Enclosure by the Battery Securing Brackets.
For floor anchoring, use the 2 transport brackets that were used to secure the UPS to the pallet during transport.
BATTERY UNIT | BATTERY UNIT |
|
|
| BATTERY UNIT |
| |
|
| BATTERY UNIT | |
|
|
|
BATTERY UNIT | BATTERY UNIT |
|
|
| BATTERY UNIT |
| |
|
| BATTERY UNIT | |
|
|
| |
BATTERY UNIT | BATTERY UNIT |
|
|
| BATTERY UNIT |
| |
|
| BATTERY UNIT | |
|
|
|
Floor Anchoring Bracket
(re-use of transport bracket)
| |
| |
Align the 4 holes in the bottom angle of the Floor Anchoring Bracket on either side of the Enlosures to the
21 |
