Safety recommendations
To avoid accidents and damage, the following recommendations should be observed during maintenance and service visits:
1.The maximum allowable pressures for system leak testing on low and high pressure side are given in the chapter “Installation”. Always provide a pressure regulator.
2.Disconnect the main supply before any servicing on the unit.
3.Service work on the refrigeration system and the electrical system should be carried out only by qualified and experienced personnel.
Maintenance contract
It is strongly recommended that you sign a maintenance contract with your local Service Agency. This contract provides regular maintenance of your installation by a specialist in our equipment. Regular maintenance ensures that any malfunction is detected and corrected in good time and minimizes the possibility that serious damage will occur. Finally, regular maintenance ensures the maximum operating life of your equipment. We would remind you that failure to respect these installation and maintenance instructions may result in immediate cancellation of the warranty.
Training
The equipment described in this manual is the result of many years of research and continuous development. To assist you in obtaining the best use of it and maintaining it in perfect operating condition over a long period of time, the manufacturer has at your disposal a refrigeration and air conditioning service school. The principal aim of this is to give operators and technicians a better knowledge of the equipment they are using, or that is under their charge. Emphasis is particularly given to the importance of periodic checks on the unit operating parameters as well as on preventive maintenance, which reduces the cost of owning the unit by avoiding serious and costly breakdown.
The manufacturer has a policy of continuous product improvement, and reserves the right to alter any details of the products at any time without notice.
This publication is a general guide to install, use and properly maintain our products. The information given may be different from the specification for a particular country or for a specific order. In this event, please refer to your nearest office.
www.trane.com
For additional information, contact:
Distributor/Installer stamp
Literature Order Number | |
Date | 0304 |
Supersedes | |
Stocking Location | Europe |
Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice. Only qualified technicians should perform the installation and servicing of equipment referred to in this publication.
For more information contactyour local district | American Standard Europe BVBA |
office or | Registered Office: 1789 Chaussée de Wavre, 1160 Brussels - Belgium |
