Logout, Help Security, Setup Security | AMX NXM-MHS, NXC-M/ME/MPE

NetLinx Security

least 4 characters long and no more than 20 characters. Any combination of letters, numbers, or other characters may be used.

After the password is entered, if the password is correct you will see a welcome banner as shown below:

Login: User1

Password: *****

Welcome to NetLinx v2.10.80 Copyright AMX Corp. 1999-2002

>

If the password is incorrect, the following will be displayed:

Login: User1

Password: *****

Login not authorized. Please try again.

After a delay, another login prompt will be displayed to allow the user to try again. If after 5 prompts, the login is not done correctly the following will be displayed and the connection closed:

Login not allowed. Goodbye!

If a user opens a connection but does not enter a user name or password (i.e. they just sit at a login prompt), the connection will be closed after 1 minute.

Logout

The logout command will log the user out of the current secure telnet session. For a Telnet connection, the session will be closed and the connection between the Telnet client and the NetLinx master will be dropped. For a Terminal session, the user will be logged out and to access Terminal commands again the user will first have to login.

Help Security

The help security command will display the security menu as shown previously.

Setup Security

The security command displays a series of menus that allow the security administrator to create and edit users, create and edit groups, and setup directory associations for the Web Server. A user must be given rights to access this command. Any user that does not have rights to Security Configuration will see the following message when trying to access the setup security command:

>setup security

You are not authorized to access security commands

If a user is authorized, or if Security Configuration security is not enabled, the Main Security Menu will be displayed.

	40	NetLinx Master Cards and Modules

Image 46

AMX NXM-MHS, NXC-M/ME/MPE instruction manual Logout, Help Security, Setup Security

Contents

NXM-MHS, NXC-M/ME/MPE NetLinx Master Cards and Modulesinstruction manual NetLinx Central Controllers and Cards AMX Limited Warranty and Disclaimer Product Information - NetLinx Modules Table of ContentsInstallation and Wiring NXC-M Master Card Program Port Commands ProgrammingNetLinx Security NetLinx Security Features Main Security Menu Default Security ConfigurationSetup Security Logging Into a Session Table of Contents NXM-MHS specifications Product Information - NetLinx ModulesNXM-MHS NXM Modules NXM-MHS Specifications NXM-MHS Specifications Cont Program Port DIP switch - baud rate settings PRD Mode Settings Baud Rate SettingsProgram Port DIP switch - Program Run Disable PRD mode Setting the Program Port DIP Switch 5-Pin Program Port Pinouts and Signals Program Port Connections/WiringDB-9 Program Port, Pinouts, and Signals DB-9 Program port front panel Rear panel LEDs ICSNet/ICSHub Modes and front panel LED blink patternsModes and LED Blink Patterns Rear panel LEDs AXLink Rear panel LEDs Ethernet ME and MPE only NXC-M Master Card Specifications SpecificationsNXC-M Master Card NXC-M Master Card Installing an optional NCP-E Ethernet Card Rear panel components 3. Mount the NCP-E to the NXC-M, as shown in FIG NXC-M Master Card NXC-ME Specifications NXC-ME Master-Ethernet CardNXC-ME Master-Ethernet Card Port Type Ethernet Ports used by the MEEthernet Ports used by the ME Standard Port # NXC-MPE Specifications NXC-MPE Master Port Expander CardNXC-MPE Master Port Expander Card ICSNet connectors/LEDs ICSHub In/Out connectors/LEDs SPE Port Connection/WiringEthernet 10/100 LEDs Ethernet 10/100 connector FIG. 9 NXC-MPE Card shown mounted in a NXS-MHS Module - rear view SPE Connector Pinouts and Signals SPE Cable pinout information NXC-MPE Master Port Expander Card Mounting the Modules Into an Equipment Rack Installation and WiringMounting the Master Cards in an NXF CardFrame or NXI Preparing/connecting captive wires ICSNet RJ-45 Connections/WiringICSNet RJ-45 Pinouts/Signals ISCHub Pinouts and Signals ICSHub RJ-45 Connections/WiringEthernet 10/100 Base-T RJ-45 Connections/Wiring Ethernet RJ-45 Pinouts and Signals Replacing the Lithium Batteries PC COM Port Communication Settings Program Port CommandsProgramming Program Port Commands Program Port Commands Cont SET TIME ESC Pass Codes ESC Pass CodesNotes on specific Telnet/Terminal clients Windows client programs Security Terms Used in This Document NetLinx Security FeaturesNetLinx Security NetLinx Security Features User Name PasswordAccess Rights Group Name Accessing the Security configuration options Initial Setup via Telnet or Terminal connectionGetting connected If NetLinx master security is not enabled, you will see the following 2 Display system security options for NetLinx master Security Options Menu3 Add user 4 Edit User Edit User Menu Access Rights Menu Access Rights MenuEdit User Menu 6 Show the list of authorized users Access Rights Menu Cont5 Delete user 7 Add Group Edit Group Menu Add directory association Edit Group menu Delete directory association Edit Group menu List directory associations Edit Group menu Change Access RightsEdit Group menu Display Access Rights 8 Edit Group 9 Delete Group 11 Set Telnet Timeout in seconds12 Display Telnet Timeout in seconds 10 Show List of Authorized Groups Main Security Menu Main Security Menu Default Security Configuration Main Security Menu Cont Security Help menu Security Help Menu Options Logging Into a Session Security Help Menu Options Cont Setup Security LogoutHelp Security Programming AMX logo to alter specificationsPanja Inc AMX reserves