AMX NXM-MHS Ethernet Ports used by the ME, Rear panel components, NXC-ME Master-Ethernet Card

NXC-ME Master-Ethernet Card

Ethernet Ports used by the ME

Ethernet Ports used by the ME

Port Type	Description	Standard Port #
• ICSP	Peer-to-peer protocol used for both master-to-master and	1319 (UDP/TCP)
	master-to-device communications.
	For maximum flexibility, the NetLinx master can be configured
	to utilize a different port than 1319 or disable ICSP over
	Ethernet completely from either Telnet or the Program Port
	located on the NetLinx master itself.
• PING PONG	You must be able to PING an NXC-ME to be able to connect	3010
	to it over a network.
• Telnet	The NetLinx telnet server provides a mechanism to configure	23 (TCP)
	and diagnose a NetLinx system.
	For maximum flexibility, the NetLinx master can be configured
	to utilize a different port than 23 or disable Telnet completely
	from either Telnet or the Program Port located on the NetLinx
	master itself. Once disabled, the only way to enable Telnet
	again is from the NetLinx master’s program port.
• HTTP	The master has a built-in web server that complies with the	80 (TCP)
	HTTP 1.0 specification and supports all of the required fea-
	tures of HTTP v1.1.
• FTP	The NXC-ME has a built-in FTP server that conforms to	21/20 (TCP)
	RFC959.
• Internet Inside	The Internet Inside feature of the NetLinx master uses, by	10500 (TCP)
	default, port 10500 for the XML based communication proto-
	col. This port is connected to the client web browser’s JVM
	when Internet Inside control pages are retrieved from the
	NetLinx master’s web server.
	For maximum flexibility, the NetLinx master can be configured
	to utilize a different port than 10500 or to disable Internet
	Inside completely.

Rear panel components

FIG. 8 shows the rear panel components of the NXC-ME Master-Ethernet Card.

NXC-ME

Master-Ethernet

12VDC

PWR

	SPEED	FD
GND AXM AXP PWR	RTS CTS TX	RX GND
AXlink

Ethernet 10/100 connector

Ethernet 10/100 LEDs

ICSNet connectors/LEDs ICSHub IN/OUT connectors/LEDs

IN

OUT

ICSNetICSHub

PROGRAM port connector

AXLink connector

AXLink status LED (green)

12 VDC power supply connector

FIG. 8 NXC-ME Master and Ethernet Card (shown mounted in a NXS-MHS Module - rear view)

12 NetLinx Master Cards and Modules