Andrew 9.3-Meter ESA manual Step, Installation Procedures, Use 7/8 by 2-1/2inch 64 mm hardware

Step 6

Refer to Figure 15. Raise assembled panning/pivot assembly and loosely attach 301786 azimuth pivot assembly to upper portion of 200068 joint assembly as shown.

•Use 7/8 by 2-1/2 inch (64 mm) hardware

Note: Position mounting hardware as shown to ensure proper panning frame clearance. Install 7/8 inch flatwashers between 301786 pivot assembly and 200068 joint assembly.

7/8”

301786 FLATWASHERS AZIMUTH PIVOT

ASSEMBLY

7/8 x 2-1/2”

(64 mm)

Figure 15

20 Installation Procedures