Andrew 9.3-Meter ESA manual Jack Tripod Assembly Step Step Step Step, Installation Procedures

Jack Tripod

Assembly

Step 1

Step 2

Step 3

Step 4

Refer to Figure 26. Assemble jack tripod by connecting tripod braces to tripod leg.

•Use 3/4 x 5-1/2 in (140 mm) bolts, lock washers and nuts

Attach jack tripod assembly braces to corresponding drum pivot/mount assemblies as shown.

•Use 3/4 x 2 in (51 mm) bolts, lock washers and nuts

Figure 26

Attach side plates to jack tripod assembly leg.

•Use 1 x 2-1/2 in (64 mm) bolt, lock washer and nut Attach side plates to drum tab.

•Use 3/4 x 2 in (51 mm) bolt, lock washer and nut

Note: Keep angled corners of side plates toward drum assembly.

31 Installation Procedures