Elevation
Jackscrew
Assembly
Step 1
Step 2
Refer to Figure 20. Apply supplied RTV to indicated flange surfaces and attach 200013- 3/200048 elevation jack screw to 200128 elevation extension assembly as shown.
•Use
Note: Mounting hardware is included with corresponding jack assembly hardware kit.
APPLY RTV
APPLY RTV
3/4 x 3” LG. (75 mm)
APPLY RTV
Figure 20
Attach 200022 pivot assembly to enclosure tripod leg assembly Note: This may also be performed during reflector assembly.
•Use 3/4 by 3.0 in (75 mm) bolts, lockwashers and nuts.
25 | Installation Procedures |
