Andrew 9.3-Meter ESA manual Step, Installation Procedures, A B

Step 6

Figure 19A

Figure 19B

Replace previously removed jack screw band clamp assembly.

Note: Attach .jack extension to pivot assembly using 7/8 by 2-3/4 in (70 mm) bolts and nuts (P/O jack assembly hardware kit), for 200013-4 azimuth jack applications.

For motorized mounts only, remove oil plug on motor assembly gearbox and replace with supplied vent plug packaged with the motor assembly.

Note: Ensure hole in vent plug is positioned downward.

24 Installation Procedures