Andrew ATC200-Lite manual Addressing, Click ‘Remove Device’

Section 4–Device Discovery and Addressing ATC200-Lite Teletilt® Remote Control Downtilt System

4.2 Addressing

1.If desired, these devices can be manually readdressed by the user. It is important to note that if manual addressing is performed, the ‘Find Device’ search function will automatically clear all manually specified addresses to ‘0’ and then readdress each device by the order they respond.

To manually readdress a device, select the device and go to ‘Tools, Addressing . . .’ from the main menu, located at the top of the main screen (Figure 4-5).

1.Click on device to be readdressed.

2.Go to ‘Tools, Addressing’.

Figure 4-5. Selecting ‘Addressing’ from the Main Menu.

2.From the ‘Manual Addressing’ dialog box, click ‘Remove Device’. This will clear the assigned address for that serial number (Figure 4-6).

Click ‘Remove Device’.

Figure 4-6. Removing Device.

4- May 2005 Bulletin 639510