Section |
5.To view the saved file, launch Word (or a similar software, such as Notepad or Wordpad) and go to ‘File, Open‘ from the main menu. Change the directory to look in ‘C:\ATC200_ Site_Files’, change the file type to ‘All Files’, and select the desired ‘txtrpt’ file from the list of files shown. Click ‘Open’ (Figure
3.Select the ‘txtrpt’ file..
1.Go to the
‘ATC200_Site_Files’ directory.
This directory is located on the C:\ drive.
2.Change file type to ‘All Files (*.*)’. This will allow the file saved as a report for Word to be seen for selection .
Figure 8-3. Opening the Report in Word.
Bulletin 639510 | May 2005 | 8- |