Section |
|
9.You will be notified when all antennas have successfully reached the new tilt angle. Click ‘OK’ (Figure
10.The ‘Set Electrical Tilt for Sector’ screen will display the new electrical tilt setting in the ‘Current Tilt’ field. At this point, either additional tilt angles may be applied or you may return to the main screen. To return to the main screen, click ‘Close’ (Figure
Click ‘OK’.
Figure 7-4. Movement Complete.
11.After all electrical tilt adjustments are made, a report can be saved to a file for future refer- ence (see Section 8).
Click ‘Close’.
Figure 7-5. Closing Sector Move Screen.
7- | May 2005 | Bulletin 639510 |
