Andrew ATC200-Lite manual Device Configuration, Selecting Device to be Configured

Section 5

Device Configuration

After new devices are found and addressed in the ATC200-Lite program, each device is ready to be configured. New devices, that have never been configured before, will display the status as ‘Not Configured’ in the ‘Device Information’ list.

1.To begin device configuration, click on the device to be configured (Figure 5-1).

2.Click on ‘Edit Selected’ to open the ‘Device Configuration’ screen (Figures 5-1 and 5-2).

1.Click on device to be configured.

2.Click ‘Edit Selected’.

Figure 5-1. Selecting Device to be Configured.

Bulletin 639510 May 2005 5-1