Andrew ATC200-Lite manual May Bulletin

Section 6–Changing the Electrical Downtilt-Single ATC200-Lite Teletilt® Remote Control Downtilt System

7.At the successful completion of an antenna movement, the ‘Current Tilt’ field will update to show the new tilt angle and the ‘New Tilt’ text entry box will be cleared in preparation for the next move (Figure 6-4). At this point, you may click on the ‘Close’ button to exit this screen and return to the main screen. Alternately, this process may be repeated to further adjust the downtilt or to reapply changes where movement had previously failed, such as a temporary mechanical jam.

8.After closing the ‘Set Antenna Tilt’ screen, the main screen will show the new electrical downtilt setting in the ‘Device Information’ list.

After all electrical tilt adjustments are made and you are ready to end the program session, a report can be saved to a file for future reference (see Section 8).

6- May 2005 Bulletin 639510