Andrew ATC200-Lite manual Part Numbering Scheme and Ordering Guide

Section 10

Part Numbering Scheme and Ordering Guide

10.1 Part Numbering Scheme

PART NUMBER	DESCRIPTION
ATC200-Lite-00xx	Local controller system. The system includes:
	•	local controller, model ATC200-Lite
	•	Ethernet crossover cable
	•	power cord*
	•	Phoenix 48 Volt power connector
	•	this installation and operation manual, part number 639510
	In the future, the system will also include a CD for the ATC200-Lite software.
	*The “xx” denotes power cord options as follows:
	01 =		Australasia (Australia and Asia)				03	=	United Kingdom
	02 = Europe						04	=	North America
ATM200-001	Actuator
ATJB200-A01-00x	Junction Box (Each junction box has 1 input, and the “x” denotes the number
	of	outputs as shown below.)
	4 = 4-Way			7 = 7-Way
ATS-A01-002	Two-way splitter enables daisy-chaining actuators on single band antennas.
ATS-B01-003	Three-way splitter enables daisy-chaining actuators on quad port antennas.
ATCB-B01-xxx	Control cable linking first to second, or second to third actuators. The “B”
	denotes connectors assembled at both ends. The “01” designates cable type.
	The “xxx” denotes cable length options as follows:
	001		= 1 meter	020	=	20 meters
	002		= 2 meters	030	=	30 meters
	003		= 3 meters	040	=	40 meters
	004		= 4 meters	050	=	50 meters
	005		= 5 meters	060	=	60 meters
	006		= 6 meters	070	=	70 meters
	009		= 9 meters	080	=	80 meters
	010		= 10 meters	090	=	90 meters
	015		= 15 meters	100	=	100 meters
ATLP-200-001	Lightning Protection Unit (Recommended)
602299	Grounding Kit (Used to ground junction boxes, splitters, and lightning protection
	unit.)
40417*	Cable Tie Wraps (Used to secure control cable to the tower.)
68MCLICK*	Hangers (Used to secure control cable to the tower.)

*Additional cable accessories are available. See ‘Cable Installation Accessories’ link from Andrew’s Teletilt® ATC200 web site.

Bulletin 639510 May 2005 10-1