Andrew ATC200-Lite manual Click ‘Save’ Assign a filename to the report

Section 8–Saving Site Report/Configurations ATC200-Lite Teletilt® Remote Control Downtilt System

2.Assign a filename for the report. The default filename consists of the date, time, and the site ID of the first actuator (Figure 8-2).

3.Select ‘Text Site Report File (*.txtrpt)’ from the ‘Save as type’ drop down selection, if not already selected.

4.Click ‘Save’.

3. Click ‘Save’.

1.Assign a filename to the report.

The date, time, and the SiteID of the first configured actuator are used for the suggested filename.

Note: All site reports are saved to C:\ATC200_Site_Files.

This directory is created if it does not pre-exist on the computer.

2.Select the file type.

Files saved in the ‘*.txtrpt’ format can be opened in Word or any other text editor, such as Notepad or Wordpad.

Figure 8-2. Selecting the File Format for Word.

8- May 2005 Bulletin 639510