Reinstall the Enclosure Plates
Reinstall the cable landing cover plates and the bottom plates
1.Reinstall the cable landing cover plates on the XR Battery Enclosure(s)
2.Install the upper part of the conduit box (if applicable) on all enclosures.
3.Reinstall the bottom plates on the UPS and the XR Battery Enclosure(s).
Reinstall the top cover, battery compartment cover, and the front panel
1.Reinstall the top cover by fastening the four screws at the front and the two screws at the back.
2.Reinstall the battery compartment cover (only applicable to Japanese configurations) by placing the taps in the slots at the bottom of the enclosure and at the top of the enclosure.
3.Attach the battery compartment cover with M6 screws to the inner side panels in both sides.
5.Reinstall the front panel by inserting the two taps at the bottom of the front panel into the two slots at the bottom of the enclosure.
6.Push the front panel forward until it engages the locking devices at the top of the enclosure.
7.Use a screwdriver to set the lock mechanism to the locked position
22 |
