APC 10-40 KVA 380/400/415 V manual Contents

Contents

Safety 1

IMPORTANT SAFETY INSTRUCTIONS

- SAVE THESE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Prepare for Floor-Anchoring (optional)	2
System arrangements	2
Hole positions for a stand-alone UPS enclosure with L-shaped
anchoring brackets	3
Hole positions for up to four UPS units in parallel with U-shaped
anchoring brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Prepare for Cables	5
Remove the front panel	5
Remove the top cover	5
Remove the cable landing cover and bottom plates	6
Remove the XR Battery Modules	7

Anchor the UPS and additional XR Battery or

UPS Enclosure(s) (optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Run the Cables 11

Connect Power in Installations with Busbars . . . . . . . . . . . . . . . . . 11

Install isolators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Install busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connect Power in Installations with Cables. . . . . . . . . . . . . . . . . . . 16

Install power cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connect Communication Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Connect the EPO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connect the EPO to the UPS and the XR Battery Enclosure . . . . 19

Smart-UPS VT ® 10-40 kVA 380/400/415 V, 208/220 V, 200/208 V Battery Installation i