APC 10-40 KVA 380/400/415 V manual Shaped floor

Anchor the UPS and additional XR Battery or UPS Enclosure(s) (optional)

Note: Enclosures can be kept apart or assembled and anchored with interconnection plates and

brackets: SUVTOPT004: 352 mm (13.85 in) UPS enclosure to XR enclosure, SUVTOPT005:

523 mm (20.59 in) UPS enclosure to XR enclosure, or SUVTOPT006: XR enclosure to XR enclosure.

Note: A baying kit includes three U-shaped floor anchoring brackets. In situations where a UPS or XR Battery Enclosure must be added to an existing configuration of two or more bayed together enclosures, only one of the U-shaped floor anchoring brackets is necessary. In those situations, please dispose of the two superfluous U-shaped floor anchoring brackets.

Note: The L-shaped floor anchoring brackets that secured the enclosure to the pallet during shipment may be used for a stand-alone UPS enclosure to enhance stability, but is not necessary when baying enclosures together. Instead, the three U-shaped floor anchoring brackets from the baying kit are used.

1.Remove the side panels from the enclosure(s) to get access to the holes in the bottom frame.

UPS XR



Note: Make sure that the enclosures

are level to be able to anchor the enclosures to each other.

2. Position two U-	Front of enclosure	Front of adjacent
shaped floor		enclosure
anchoring
brackets under	U-shaped floor
one enclosure;	anchoring
one in each	bracket
side.		
	
		

8 Smart-UPS VT ® 10-40 kVA 380/400/415 V, 208/220 V, 200/208 V Battery Installation