APC 10-40 KVA 380/400/415 V manual Feed the cable up

Install power cables between two XR Battery Enclosures.

1. Feed the cable up

through the conduit

box on XR1 or

through the

transparent cable

route bracket (not

shown) to the cable

connection area.

2. Connect the (-) cable

to busbar no. 5 (-), the

XR2 Battery Enclosure rear view XR1 Battery Enclosure rear view

	N cable to busbar no.
	3 (N), and the (+)
	cable to busbar no. 2
	(+) in XR1.
3.	Secure the cable to
	the perforated bracket
	with cable ties.
4.	Equip the cable with
	conduits (if
	applicable).
5.	Feed the cable up into
	the conduit box
	(optional for 400 V
	versions) on XR2.
6.	Connect the (-) cable
	to busbar no. 6 (-), the
	N cable to busbar no.
	4 (N), and the (+)
	cable to busbar no. 1
	(+) in XR2.
7.	Secure the cable to
	the perforated bracket
	with cable ties.
8.	Attach the top part of


BAT	
	
	BAT
	



To XR3

 

BAT



BAT







the conduit box (if

applicable).

From UPS

Note: If you use floor anchoring, carry out the floor anchoring procedures now.

Smart-UPS VT ® 10-40 kVA 380/400/415 V, 208/220 V, 200/208 V Battery Installation 17