Initial Operation

14

Remove lens. See Chapter 7.2 (# 4)

Check that the film gate frame and the surface of the film track are clean.

Insert the format mask with the film gate frame facing the film gate (frameless side facing upward) by sliding the mask in from the right side into the spring-loaded support of the film track until the mask engages with the film gate.

Check the film gate mask for correct positioning.

Replace lens.

Replace optics cover.

Remove format mask:

Open film channel with ”Film” – key

Switch off main power supply.

Remove optics cover. See Chapter 7.2 (# 2)

Remove lens. See Chapter 7.2 (# 4)

Remove the mask from the film gate by gently pressing back the mask and then sliding it back out to the right

photo.

Replace lens.

Replace optics cover.