Functions
38
6.7.4 ”Mode” key
The ”Mode” key ➪ photo only functions, when the Master | Mode 1: Normal viewing | |
Control Knob is in the ”0” position. Each stroke of this key | The display shows the frame rate in fps on the | |
leads to the next lower menu level, i.e. from mode 1 to | left sideand the frame counter on the right (if an | |
mode 2, etc. (see chapter 6.6). | error occurs, an ”error” message will appear). | |
| Mode 2: Video masking | |
| Depress ”Mode” key once. | |
| A video mask can then be positioned on all four | |
| sides, and the masking function can be switched | |
| on and off. The masks are only visible on the | |
| video monitor. (see chapter 6.5.1 ”Masking of | |
| Video Images”). | |
| Mode 3: Frame rate selection | |
| Press ”Mode” key twice. | |
| The programmed frame rate can be changed | |
“Mode“- key | by repeatedly pressing of the ”Reset” key | |
(higher values) or of the ”Film” key (lower values). | ||
| ||
| Mode 4: Unit configuration | |
| Press ”Mode” key three times. | |
| In this mode the film type and film core diameter | |
| can be selected (see chapter 6.6). | |
|
|