58
Fault | Cause | Remedy |
|
|
|
Scratches in film perforation area | Emulsion buildup on film guiding parts. | Clean film guiding parts |
|
| in accordance with maintenance instructions. |
| Film guide runners damaged, surface worn through. | Call ARRI Service station. |
| Pressure pad damaged | Call ARRI Service station. |
| by stapled film |
|
|
|
|
Scratches on film backing side | Emulsion deposits on pressure pad or on film gate | Clean pressure pad and film gate |
Positive and negative film |
| in accordance with maintenance instructions. |
| Pressure pad jamming. | Call ARRI Service station. |
|
|
|
HTI lamp not properly installed | Check HTI Lamp plug for correct locking | |
|
| (experienced personnel only) |
| Defective lamp | Replace lamp (experienced personnel only) |
| Ballast not functioning | Call service engineer |
|
|
|