Initial Operation
18
| 3) | Insert film into the film channel and fix end of the film | |
frame counter |
| in the film core of the right winding plate. Then wind | |
|
| up approx. three turns. | |
|
|
| Ensure same winding direction on both plates! |
|
|
| To avoid damage of film track do not use |
|
|
| stapled film. |
“film“- key | 4) | Tighten both film rolls. | |
| 5) | Press ”film” key briefly. | |
|
| The feed carriage closes the film channel. | |
|
| The film loop is formed automatically and the frame | |
|
| ||
|
| counter ➪ photo is reset to ”0”. | |
5.7 Film loading | Note: | Inside or outside winding direction (A/B) are | |
|
| recognized by the projector. |
1)Place the film roll with the neg. film on the left film plate so that the emulsion side is facing the operator. If a print film is projected, the emulsion side must be on the opposite side.
2)Open the film channel by depressing ”film” key ➪ photo for some time (>1s).