5.6 Switching on | master control knob |
the HTI lamp |
|
Before switching on the HTI lamp, please ensure that
• The Master Control Knob ➪ photo is in the ”0” position.
• Film is not running in the projector.
1)Depress ”lamp” key for approx. 1 second to ignite the lamp. During this ignition phase, which lasts approx. 5 seconds, all key functions are disabled.
2)The HTI lamp can be switched off after a reset time of 5 seconds by depressing the ”lamp” key again.
Note: | Note: | The average life of an HTI lamp | |
| seconds. Working temperature of the lamp is |
| is approx. 750 hours. |
| reached in three minutes. During this period the |
| Spare lamps can be ordered under |
| lamp should never be switched off, because this |
| Id.No. 05.09873.0. |
| gradually reduces the life of the lamp and |
|
|
| results in poor ignition behavior. |
|
|
Initial Operation
17