6.1.3 Frame Rate

The frame rate can only be set after the mains has been switched on and the film channel is closed. Ensure that the Master Control Knob photo is reset to ”0” each time after the film channel has closed.

1)Select the requested frame rate (visible on the display) by turning the Master Control Knob photo. The film now runs at the selected speed.

The following frame rates can be chosen for forward and reverse operation:

50 Hz Version

1.56-3.12-6.25-12.5-25-50 fps (standard) Highspeed shuttle 200 fps

48-24-30 fps can be selected directly via ”Mode” Key

photo (see chapter 6.6).

60 Hz Version

1.87-3.75-7.5-15-30-60- fps (standard) Highspeed shuttle 200 fps

48-24-25 fps can be selected directly via ”Mode” Key

photo.

master control knob

“Mode“- key

Functions

23