6.1.5 Autostop Function

master control knob

In order to prevent the film from unintentionally running out to the end, the auto-stop feature automatically stops the film approx. 2 m (6 ft) before the end. This applies to both film plates.

Note:

The auto-stop function is only ensured if the film

 

 

core used coincides with the value selected in

 

 

mode 4 (”more config” ”bobby size”).

“film“- key

 

Selectable diameters are 50 (2“), 75 (3“) and

 

 

100 mm (4“).

 

Functions

Disabling the Auto-stop Function

•To run the film completely through the film channel without end stop, press the ”Film” Key ➪ photo during projection or high speed shuttle. The frame counter display flashes, the auto-stop feature is disabled and the film runs through the film channel without stopping.

The auto-stop function is reactivated by changing the direction of film transport with the Master Control Knob.

6.2Highspeed Shuttle/ Rewinding

By turning the Master Control Knob ➪ photo beyond the highest projection speed to the left or right, the film runs at a speed of approx. 200 fps in the selected direction.

During this high speed transport mode the film stage is lifted up by magnets for safer film transport. When releasing the Master Control Knob, film transport is reduced to fastest projection speed.

25