Service and Maintenance

46

control knobs

4 screws

loop box

deflection runner 1

optic cover

lamp cover

filmtrack

deflection runner 2

2)Pull off the control knobs ➪ photo upward.

3)Remove all four screws ➪ photo with hex. Wrench SW3 and lift off optics’ cover completely.

Attention:

Do not damage BNC and S-VHS plug and make sure that there is no cable connected to the BNC or S-VHS plug!

4)Remove emulsion deposits and possible adhesive residues from film track ➪ photo, deflection runner 1 and 2 ➪ photo and loop box left.

5)Replace lamp cover.

6)Replace optic cover

7)Replace control knobs and fasten optic cover with the screws.