6.5 Video

6.5.1 Masking of Video Images

It is only possible to mask a video image when the Master Control Knob is in the ”0” position (still projection).

1)Connect a monitor to one of the two video sockets.

2)Select ”Video” (mode 2) by depressing the ”Mode” Key ➪ photo.

3)Frame masking is activated with ”Reset” Key and deactivated with ”Film” Key.

4)After the masking function is activated, select the side to be masked (top, bottom, right, left) with ”Lamp” key. Masking and shift direction arrows (<>^v) are only visible on the monitor ➪ photo.

5)Adjust masking of the video image to the required position by using the ”Reset” and ”Film” Keys.

Mode 2: Masking of Video Images

“mode“- key“reset“- key

“lamp“- key

“film“- key

 

 

Monitor

VIDEO

ON

direction

MODE

RESET

with "RESET"-key

NEXT

OFF

 

 

CLOSE

 

ON/OFF

ADJUST

 

 

OPEN

 

LAMP

FILM

 

 

 

Monitor

1 X

 

direction

 

 

with "FILM"-key

2 X

selecting

 

 

the direction

 

3 X

for moving the mask

 

4 X

 

 

Functions

29