3. General Product Information

The LOCPRO 35 is a lightweight mobile projector for on- location use. A switch-over mirror system allows either wall projection or the use of a 1/3” CCD Color High Resolution video camera. The LOCPRO 35 can synchronize DAT-recorders or perfotape players for picture/sound synchronization. The following sync signals are available for output: For synchronization with DAT recorders a timecode LTC signal, for synchronization with perfotape players in connection with ASU-accessory (Audio Sync Unit) a biphase signal with a programmable number of pulses per picture.

•Fast film transport and simple operation:

The film is transported by a motor with a directly-driven double-sided sprocket wheel. This patented intermittent film drive system is acute to less than 0.01 seconds at any projection speed. Constant film tension and safe film transport are ensured by computer-controlled drive motors for both film carriers. The ”auto-stop” feature stops the film automatically 6 ft (2 m) before the end of the film.

Automatic detection of the winding direction makes it unnecessary to manually switch over from winding direction A to B.

The open film channel facilitates film loading once the film has been placed onto the winding plate. All steps from the formation of loop sizes to standby operation are carried out fully automatically. In addition, a film can be removed at any time even in the middle of a film roll.

•Direct high speed rewinding:

High speed rewinding and quick location of certain film scenes is easily possible with the gentle high speed shuttle/rewinding system. By simply turning the Master Control Knob this system allows you to switch directly to high speed winding at 200 fps and back to the chosen projection speed. The frame counter remains active so that after switching back from high speed winding to projection speed, the frame line is automatically repositioned to the correct setting.

General Product Information

7