6. Functions

6.1 Wall Projection

The LOCPRO 35 must stand on a solid, flat surface and should be completely disconnected from the mains before it is moved.

See also notes in chapter 4.

Optimum wall projection of approx. 2.3 m (7 ft) width is reached at a distance of 4 m (12 ft), measured from the back of the unit to the projection wall.

6.1.1 Frame line

After closing the film channel (see chapter 5.7), adjust the frame line, if necessary.

Note:

Frame line adjustment is only possible during

 

still projection.

master control knob

“film“- key

1)Master control knob is in ”0” position (no film transport).

2)The frame line (horizontal line in the projected picture) can be shifted out of the visible picture by briefly depressing the ”film” key photo.

Each keystroke shifts the frame line by 1/4 frame.

Functions

21