Safety

6

•Make sure the LOCPRO 35 stands securely and do not block the air vents of the HTI lamp cooling fan on the bottom side! See ➪ photo page 9.

•Keep all inflammable material away from the air vents of the HTI lamp cooling fan.

see ➪ photo page 9.

•For sufficient air cooling, it is essential that the air supply and escape vents on the sides are not blocked. see ➪ photo page 9.

•Disconnect the unit from the mains before starting maintenance or service!

•The unit is to be opened only by a qualified electrical specialist. If fuses need to be replaced, ensure that only the values indicated are used. See chapter 7.4.

•Repairs should be made by authorized service tech- nicians only!

•Use only original replacement parts and accessories!

•Follow the maintenance instructions in this user manual.

•Follow the shipping and storing instructions.

Important Notes

•In humid weather please take the usual and customary safety measures.

•In case of poor picture steadiness check the film guide for possible contamination, such as e.g. splicing residues or emulsion deposits.Clean if necessary! (see chapter 7.1)

•Optical surfaces should only be cleaned with an optic cleaning brush. To remove sticky emulsion deposits, please use an optic tissue, moistened with pure alcohol.

•Do not use solvents for cleaning!

•Do not loosen the paint-secured screws!

Product Identification

Please always refer to the model type and unit serial number when ordering spare parts or requesting information.

Explanation of the Symbols

➪photo refers to objects identified by pictures, photos or graphs.