6.9

Interfaces

Note:

All interface cables used must comply with CE

 

and EMV guide lines.

6.9.1 Serial Interface (X1)

Plug type: Sub-D 25 pin socket

Via serial interface (X1) photo the operational status of the LOCPRO 35 can be checked and changed from a computer.

Chapter 8 ”Serial Interfaces X1” contains listings of technical data as well as listings of computer commands.

Plug – Pin configuration: See Annex ”Interfaces”

6.9.2 Ext Synchro (X2)

Plug type: Sub-D 15 pin socket

Via this interface photo a signal for shutter synchronization can be supplied externally and the internal shutter signal accessed.

X3 X2 X1

Cine Mode:

........................................................

48 Hz

Normal and Telecine Mode: .......................

50 or 60 Hz

Shutter revolutions can be changed by ± 3%.

 

Input: ....................

5 V TTL potential-free on optocoupler

Output: .................

4 V potential output or potential-free

Plug Pin configuration: see annex ”Interface”

 

Note for shutter synchronization:

 

Signal source:

 

External

=

control frequency via X2; top priority!

Video

=

when video ”on”. Quartz of video camera.

Internal

=

internal quartz generator.

 

Functions

43