Asante Technologies IC3624PWR user manual Quality of Service Configuration, Policy, Mapping Method

63

6.3.5.7 Policy

Use this submenu to create, delete, enable or disable, show status or sequence and update the policies for the different ports. A policy may associated with classifier, in-profile, no-match, out-profile, port list, and sequence. Classifier and port list are necessary for a policy.

Map: Main Menu->Advanced Switch Configuration->Access Control->Policy

Six options are available in this page:

•Create Policy

•Delete Policy

•Enable or Disable Policy

•Show Policy Entry

•Update Policy

•Display Sequence By Port

6.3.6 Quality of Service Configuration

The priority tag of each packet is divided into four queues on each output port. The default is each queue takes two priorities sequentially. The Administrator may configure the traffic class. The Quality of Service (QoS) only works after the QoS status is enabled. Use the Set QoS Status options to enable this feature.

Map: Main Menu->Advanced Switch Configuration->Quality of Service Configuration

There are two features your can configure from this menu.

•Mapping Method

•Scheduling Method

6.3.6.1 Mapping Method

Use this submenu to set the traffic class mapping method.

Map: Main Menu->Advanced Switch Configuration->Quality of Service Configuration->Mapping Method

The following three functions are available from this screen.

•QoS Status

•Traffic Class Mapping

•Scheduling Method Configuration

IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit