35
6.2.3.2 Trap Configuration
All hosts in community strings with TRAP privileges are notified when a trap condition occurs.
Map: Main
6.2.3.3 Individual Trap Configuration
When this feature is enabled the system generates an SNMP trap when a host authorization failure occurs. The failure occurs when a host tries to gain access to the system and the host’s IP address is not in the SNMP host table.
Map: Main
SNMP Authentication Failure Trap
Enable | The system will generate a SNMP trap upon a host authorization failure |
|
|
Disable | The authentication traps will not be generated |
|
|
All hosts in community strings with TRAP privileges are notified when a trap condition occurs. Three commands used to set the trap condition are as follows:
Enable/Disable Auth Fail Trap: | Enable or disable the authentication failure trap. |
|
|
Add Link Down Trap Ports: | Add individual port onto the trap list. |
|
|
Delete Link Down Trap Ports: | Delete individual port from the trap list |
|
|
