Menu Functions
The following list outlines all of the menus that are accessable via the user inter- face. Some menus, as noted, are only accessible when the printer has been paused using the PRINT/PAUSE key. Some menus, like the Cutter menus, are only available when a specific option has been enabled or is in use.
The following menus are available when printer is in a Ready or Pause state:
Menu | Possible Values |
• Speed | 2 - 7 inches/sec |
• Intensity | 1 - 32 |
• Print Offset | |
• Counter | Off - Batch - Total |
• Windows Print | 1 - 999 labels |
(available only when Windows Mode is enabled) | |
• Mirror Mode | Off or On |
(available only when Windows Mode is disabled) | |
• Cut Flag | Off or On |
• Cut Offset | |
• Print Line Adj. | |
• Cross Web Adj. |
The following menus are available only when printer is in a Pause state:
Menu | Possible Values |
• TTR Sensor | Enabled, Disabled |
• Calibrate | Gap, Reflective, Continuous |
• Test Print | Test Pattern 1”, 2”, 3”, 4”, 5” |
| Block Pattern (All) |
| Proc. Block (CMYK) |
| Proc. Block (KCMY) |
• Factory Reset | Horiz. Line Pattern |
None | |
• Sys Upgrade | None |
• QLS Settings | None |
• System Baseline | |
• TTR/Media | Standard, Resin/Synthetic |
• TTR Drop | 0 to +40 mm (heads 1 - 4) |
42 |