Calibrate
Calibrating the printer for the type of media being used is essential and is the first procedure that must be performed prior to printing and whenever the media type is changed. If the printer is not properly calibrated, any of the following may occur:
•Printer will not initiate printing
•Media advances but no image is printed
•Printer will report a Media Out error
•Image placement is incorrect or the printed image is clipped
•Color QuickLabel® 99 Pro software reports an error
The calibration process automatically senses any gap, notch or index mark on the media. This allows the printer to position widely varying types of media automatically and correctly. The printer stores the last calibration in
The printer’s internal label queue is reset during the calibration process. Any labels pending in the queue are terminated. Refer to the calibration procedures outlined in Chapter 3.
57 |