Cutter Offset
When printing on media with registration marks (gaps, reflective marks, etc.), the printer will place the label image area between the registration marks. If neces- sary, you can adjust the location of the cut line relative to the printed image. The Cut Offset can be used to move the cut line forward or backward with respect to the top of the label.
To adjust the cut position:
1Press the NEXT or PREVIOUS key until the Cutter Offset menu is displayed.
Pause: Cutter |
|
|
Offset = | 0 | * |
2Press the + or - key until the desired cut offset setting is displayed.
•Cut offset settings are
•Negative values move the cut line towards the bottom of the tag
•Positive values move the cut line towards the top of the tag
3Press the SELECT key to confirm your choice.
Note
Setting the cut offset via software will always override this setting. You can set the cut offset via Color QuickLabel 99 Pro or the QuickLabel Systems Windows Printer driver.
Note
The Print Offset will affect the Cut Offset. As a rule, the print offset should be set first.
51 |