To perform a Print Line Adjustment:
1Press the NEXT or PREVIOUS key to cycle through the Print Line Adj menus until the print station you want to adjust is displayed.
Pause: Print Line Adj |
|
Head 1 = | * |
2 Press the + or - key to shift the selected print position in the desired direction. Increasingly positive values will move the print position up on the label. Increasingly negative values will move the print position down on the label.
3Press the SELECT key. An asterisk (*) appears to confirm your choice.
4Repeat steps 1 - 3 until each of the printed bars for stations 1, 2, and 3 are properly aligned with the bars for station 4.
Note
An efficient way to shift the print line for a given print station is to measure the variation from the reference bar in the test pattern. Recall that print stations 1, 2, and 3 are adjusted while referencing print station 4. For example, if the bar printed on station 1 is measured to be misaligned with the reference bar printed on station 4 by 2 millimeters, you know that you need to shift station 1 by 24 pixels. The direction of misalignment will dictate whether you move the print line +24 or
53 |