DIP Switch Settings
Located on the rear panel of the printer are a series of small switches used to set various communication parameters and option settings. Use a small, blunt pointed object like a pencil to change the position of these switches.
Use the instructions below and the table on the next page to set the dip switches for your printing requirements.
DIP Switch | Function |
1 & 2 | |
3 | |
4 | Parallel or Serial Communication |
5 & 6 | Not Used (Factory Set to Off) |
7 | Cutter and Cutter/Stacker Option |
8 | Standard or Windows Host Mode |
Note
If changes are made to DIP switch settings while the printer is powered on, the power must be cycled for the changes to be recognized.
24 |