•When connected via Infrared, move the device away from the other computer or device.
•When connected via a network (Ethernet) card, remove the card from your device.
•When connected via a wireless network, switch off the connection.
Setting up a WAP gateway
To access WAP sites through Pocket Internet Explorer, configure your device to use a WAP gateway. Use the following steps to create a new set of connections to the Internet with WAP gateway settings.
NOTE Some device models do not support the WAP sites viewing feature.
1.Get the following information from your ISP: ISP server phone number, user name, and password. Also, contact your mobile phone service provider and ask for your WAP gateway server name and port number.
2.Tap 
> Settings > Connections tab > Connections.
3.Tap Edit my proxy server. If a proxy server has not been set up, tap Set up my proxy server.
4.In Programs that automatically connect to the Internet should connect using, tap New and enter a name for the ISP connection.
5.On the Proxy Settings tab, select This network connects to the Internet and This network uses a proxy server to connect to the Internet.
6.If necessary, in the Proxy server box, enter the proxy server name.
7.Tap Advanced > WAP.
8.In the Server box, enter the WAP gateway server name. Under Port, enter the port number. The most common WAP port number is 9201.
9.Enter any logon credentials required by the WAP gateway server.
Using dialing rules
Additional numbers may need to be dialed depending on your given location when connecting. For example, if you want to dial from work, a 9 prefix must often be dialed, or an area code is needed.
74 | Chapter 7 |
