AT&T 1040 user manual Display screen messages, LCD contrast

Getting started

Display screen messages

SPECIAL OPTIONS

LEVEL-4

LCD CONTRAST

LCD contrast

Your set's display provides important information. You can adjust the screen contrast to one of eight levels to optimize readability in different lighting conditions.

1. Press [ENTER].

2. Press [] or [ ] until you see SPECIAL OPTIONS.

Press [ENTER].

3. Press [] or [] until you see LCD CONTRAST.

4. Press [] or [] to select the screen contrast level (1-8).

5. To move to the next feature, press [].

-OR-

To exit setup, press and hold [ENTER].

AC FAIL	There is no AC power to the set. If a good battery
	is installed, basic phone operation is supported,
	(such as making and answering calls on the
	handset.) Speakerphone, headset and call privacy
	are not supported. The handset volume will be at
	the minimum level and only the two lowest levels
	will be available for the ringer volume.
DND	The Do Not Disturb mode is on.
DTAD: XX/YY	Flashes when the mailboxes of the DTAD mailbox
	1080 telephone are full or when the auto
	attendant of the DTAD mailbox 1080 telephone
	is off. (XX is the total number of new system
	extension messages recorded for this 1040
	telephone. YY is the total number of all system
	extension messages recorded for this 1040
	telephone.)
(EMPTY)	The one-touch location is empty.
EXT XX RING	There is an incoming Centrex call.
	continued on next page