Appendix E

Important product information

Especially about corded telephones

Electrical power: The telephone base must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch.

Calls cannot be made from the handset if the telephone base is unplugged or switched off, or if the electrical power is interrupted.

Power adapter: The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Especially about telephone answering systems

Two-way recording: This unit does not sound warning beeps to let the other party know that the call is being recorded. To ensure that you are in compli- ance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the call.

SAVE THESE INSTRUCTIONS

51

Page 57
Image 57
AT&T 1040 user manual Especially about corded telephones, Especially about telephone answering systems