Telephone operation

Basic phone operation

continued from previous page

Headset (purchased separately)

You can use this phone hands-free when you install any industry-standard two-band 2.5mm headset or other compatible, electronically isolated headset. The headsets must be purchased separately.

To make a call:

1.Press [HEADSET] (if a headset is connected to the telephone base).

2.Wait for a dial tone, then dial the number.

To answer a call, press [HEADSET].

To hang up, press [HEADSET].

Make sure the headset is plugged into the headset jack. You will hear a triple-beep if you press [HEADSET] when the headset is not plugged in.

NOTE: If SPEAKERPHONE is selected in the AUTOMATIC MODE menu (page 39 of the installation guide), pressing any line key will select the line and activate the speakerphone. If HEADSET is selected in the AUTOMATIC MODE menu and a headset is connected, pressing any [LINE] key will select the line and activate the headset.

11

Page 17
Image 17
AT&T 1040 user manual Headset purchased separately