One-touch setup and operation

To dial a one-touch number

This phone comes with one-touch preference preset to INTERCOM.

NOTE: To change one-touch preference, see PREFERENCE on page 35 of this manual.

If one-touch preference is set to INTERCOM:

1.Lift the handset.

-OR-

Press [ SPEAKER].

-OR-

Press [HEADSET] and listen for the dial tone.

2. Press the one-touch button.

-OR-

Press [LOWER], then press the one-touch button for the destination number you want to call. The screen displays the number as it is dialed.

If one-touch preference is set to TELEPHONE: You do not need to go off hook and listen for a dial tone before dialing a one-touch number. You can simply:

Press the one-touch button.

-OR-

Press [LOWER], then press the one-touch button for the desired number to call.

The screen displays the number as it is dialed using the speakerphone or headset as programmed for automatic mode. (See Automatic mode on page 39 of the installation guide.)

38

Page 44
Image 44
AT&T 1040 user manual To dial a one-touch number, If one-touch preference is set to Intercom