Recall
If users have problems with the recall signal, you may need to reset the Recall Timer Duration (#l07).
Feature Code: 03
Description: Sends a timed switchhook flash over the telephone line. The user may need to send a recall signal to use certain Centrex or PBX features, such as Call Waiting. By programming this feature on a button, the user can send a recall signal with one touch.
Programming Steps:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The
display reads:
CENTRAL TEL PROG
Extension:
2.Enter the extension to be programmed. For example, to program exten- sion 19, press [ 1 ] [ 9 ]. The dispIay reads:
PROGRAM EXT 19
3.Select a button to program by pressing any programmable button.
4.Press [ Feature ] [ 0 ] [ 3 ]. The display reads:
Recall
To program another feature on this extension, go to step 3 for that feature.
Save Number Redial
Unlike Last Number Redial
(p.
A phone can have more .Than one Save Number Redial button.
Feature Code: 04
Description: Saves an outside phone number into temporary memory for later redialing. The number stays in the memory until the user saves a new number. By programming this feature on a button, the user can save the number with one touch and later dial it with one touch. System Speed Dial numbers cannot be saved.
Programming Steps:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The display reads:
CENTRAL TEL PROG
Extension:
2.Enter the extension to be programmed. For example, to program exten- sion 21, press [ 2 ] [ 1 ]. The display reads:
PROGRAM EXT 21
3.Select a button to program by pressing any programmable button.
4.Press [ Feature ] [ 0 ] [ 3 ] . The display reads:
SaveNumberRedial
To program another feature on this extension, go to step 3 for that feature.
