SYSTEM PROGRAMMING
TO ENTER PROGRAM MODE | TO GO TO A PARTICULAR PROCEDURE |
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] | DIAL ITS |
TO CYCLE THROUGH THE PROCEDURES | Example: [ # ] [ 1 ] [ 0 ] [ 1 ] |
| |
Press [ Next Proc ] or [ Prev Proc ] |
|
TO RETURN DATA TO FACTORY SETTlNG: Press [ Remove ]
TO LEAVE SYSTEM PROGRAM MODE: Press [ Feature ] [ 0 ] [ 0 ]
I
✓= Factory Setting
*NOTE: Procedure #104 is a “shortcut” procedure that assigns all extensions and changes the following procedures to their factory settings: Line Type (#202), Hold Disconnect Time (#203), Automatic Line Selection, and Line Ringing Options. To change line assignments without affecting other settings, use Line Assignment (#301).
SYSTEM DATE (p.
DIAL #101
DIAL the date inMMDDY form
SYSTEM DAY (p.
DIAL #102
DIAL 1 = Sunday 3
2 = Monday
3 = Tuesday
4 = Wednesday
5 = Thursday
6 = Friday
7 = Saturday
SYSTEM TIME (p.
DIAL #103
DIAL the date in hhmm form Use
NUMBER OF LINES (p. 3-5)*
DIAL #104
Dial one digit for the number of out-
side lines in the sustem (0 to 8) ( ✓ = 2 per 206 module)
TRANSFER RETURN RINGS (p. 3-6)
DIAL #105
DIAL one digit for the number of rings before a transferred call returns to the originator (0 to 9) (✓ = 4)
PBX
DIAL #106
DIAL the digit for the code needed to reach a PBX or Centrex (0 to 9) ( ✓ = 9)
RECALL TIMER DURATION (p. 3-7)
DIAL #107
DIAL two digits to set the length of a switchhook flash (01 to 80) where 1=25 mseo ( ✓ = 18, 450 msec)
ROTARY DIALING TIMEOUT (p. 38)
DIAL #108
DIAL 1 = 4 seconds 2 = 8 seconds ✓ 3 =12 seconds
OUTSIDE CONFERENCE (P. 38)
DIAL #109
DIAL 1 = Allowed ✓
2 = Disallowed
DIAL MODE ( p. 3-9)
DIAL #201
DIAL a fine number
DIAL 1 =
2 = Rotary
PRESS [ Next Item ] to program another line
LINE TYPE (P. 3 10)
DIAL #202
DIAL a line number
DIAL 1 = CO (outside line)✓ 2 = PBX
PRESS [ Next Item ] to program another line
HOW DISCONNECT TIME (p. 3-11)
DIAL #203
DIAL a line number
DIAL 1 = Long (450 msec) ✓
2= Short (50 msec)
PRESS [ Next Item ] to program another line
LINE ASSIGNMENT (p. 3-12)
DIAL #301
DIAL an extension number
DIAL a line number (1 to 8)
DIAL 1 = Assigned ✓ 2 = Not Assigned
PRESS [ Next tem ] to program another line for this extension
LINE USE RESTRICTI0N (p. 3-13)
DIAL #302
DIAL an extension number
DIAL a line number
DIAL 1 = No Restriction ✓
2 = Outgoing Only
3 = Incoming Only
4 = No Access
PRESS [ Next Item ] to program another line
DISPLAY LANGUAGE (p. 3-14)
DIAL #303
DIAL an extension number
DIAL | 1 | = English ✓ | |
| 2 | = Spanish | |
|
| 3 | = French |
PRESS [ Next Item ] program another extension
AUTOMATIC PRIVACY (p. 3-15)
DIAL #304
DIAL an extension number
DIAL 1 = Assigned
2 = Not Assigned
PRESS [ Next Item ] to program another extension
ABBREVIATED RINGING (p. 3-16
DIAL #305
DIAL an extension number
DIAL 1 = Active
ringing)
PRESS [ Next Item ] to program another extension
COPY SETTINGS (p.
DIAL #399
DIAL a source extension number
DIAL a target extension number
For Centralized Telephone Programming and System Speed Dial Numbers, see previous page.
