Outgoing Call
Restrictions
While procedures that restrict dialing are very effective, abso- lute protection against misuse cannot be guaranteed. PARTNER phones give you more protection against such misuse than standard phones. There- fore, we strongly recommend that you install PARTNER phones where restricting phone use is important.
See appendix B for a complete summary of dialing restrictions.
Code: #401
Description: Restricts the types of calls an extension can make. An extension can be restricted to inside calling only, or to local and inside calling. Outgoing Call Restrictions apply to all lines assigned to the extension. The System Pass- word (#403), Emergency Phone Number List (#406), Disallowed and Allowed Phone Number Lists (#404 and #407) override Outgoing Call Restrictions.
Valid Entries: ✓ 1 = No restriction (can make toll, local, and inside calls) 2 = Inside only (can make inside calls only)
3 = Local only (can make local outside and inside calls only)
Programming Steps:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 1 ]. The display reads:
Call Restrict
Extension:
2.Enter the extension to be programmed. For example, to select extension 30, press [ 3 ] [ 0 ] . The display reads:
Call Restrict 30
1 No Restriction
3.To change the type of call restriction, enter the appropriate setting number as listed above. For example, to restrict this extension to local and inter- com calling, press [ 3 ] . The display reads:
Call Restrict 30
3 Local Only
To program another extension, press [ Next Item ] or [ Prev Item ] until the extension number shows on the display. Repeat step 4.
