ATEN Technology CN-6000 user manual Installation

Hardware Setup

Installation

1.Before you begin, make sure that power to all the devices you will be connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.

2.To prevent damage to your installation, make sure that all devices on the installation are properly grounded.

To install the CN-6000, refer to the diagram below (the diagram numbers corre- spond to the numbered steps), and do the following:

1.Plug the local administrator’s keyboard, mouse, and monitor into the unit’s Console Ports.

2.Use the KVM cable provided with this package to connect the CN-6000’s KVM Port, to the Keyboard, Video and Mouse ports of the server or KVM switch that you are installing.

3.Plug the LAN or WAN cable into the CN-6000’s RJ-45 socket.

4.Plug the power adapter cable into the CN-6000’s power jack, then plug the power adapter into an AC power source.

5.Power up your server or KVM installation.

2

KVM Switch

4

3

1

7

2003-11-03